Mini Tilting Car Lift for Low Ceilings (PJS)

Overview

The Mini Tilting Car Lift for Low Ceilings is a tilting two-level lift system from our two-level parking lifts range (model PJS), built for low-ceiling garages and residential buildings.

It is rated at 2,500 kg per platform and stores cars on 2 levels.

Motion comes from a hydraulic or electric drive.

Every unit is assembled and load-tested in our factory before shipment and is covered by a 12-month warranty.

A hydraulic cylinder raises a platform on two or four posts so a second car can park underneath. Mechanical locks engage on a safety ladder at the parking height, so the platform does not rely on hydraulic pressure while parked. Tilting models angle the platform to fit lower ceilings.

Suitable for

Low-ceiling garages
Residential buildings

Why engineers choose it

Doubles capacity in a single bay
Installed in about a day per unit
Two-post, four-post and tilting options
Low power demand (220 V or 380 V)

Product photos

Technical specifications · Mini Tilting Car Lift for Low Ceilings
Model	PJS
Load capacity	2500 kg
Parking spaces	SUV or sedan
Equipment height	3300-3600
Max. car size	500019001550/1700mm
Drive	Hydraulic, electric
Retrieval time	3-40s
Noise level	65db
Application	Commercial, high-rise building, residential
Warranty	12 months
MOQ	1 Unit
Origin	China

Specifications may be adapted to your project. Final values are confirmed on the approved drawing.

What is the load capacity of the Mini Tilting Car Lift for Low Ceilings?

It is rated at 2,500 kg. Tell us your heaviest vehicle and we will confirm the right model.

Is the Mini Tilting Car Lift for Low Ceilings suitable for my site?

It is designed for low-ceiling garages and residential buildings. Send us your clear height, footprint and number of cars, and our engineers will check the layout before you order.

What is the minimum order and lead time?

The minimum order is 1 set. Lead time is typically 15–30 days after deposit for standard lifts and stackers; for engineered systems it is confirmed with the quotation for engineered systems (puzzle, rotary, plane moving and tower).

Can it be customised?

Yes. Finish colour (RAL), voltage and frequency (220 V / 380 V, 50 / 60 Hz), control method and platform size can be adapted to your project.

What warranty and support do you provide?

12 months warranty against manufacturing defects, installation drawings and manual, video-call guidance for installers and spare parts shipped from Shanghai.

Incoterms: FOB Shanghai, CFR or CIF to your port
Lead time: 15–30 days after deposit for standard lifts and stackers; confirmed with the quotation for engineered systems (puzzle, rotary, plane moving and tower)
Packing: steel parts bundled in containers, electrics in wooden cases
Documents: invoice, packing list, B/L, certificate of origin, CE documents